Dear friends!
I would like to ask you to help me with ideas for our new kits. While I have a lot of ideas for big kits (conversion and full resin kits), I need in your suggestions for small additional kits like engines, suspensions and so on.
Please, let me know what parts do you need / want to see in resin? For comments registration is not needed.
Thank you,
Andrey Myakotkin.
I would like that you had Volvo tag axle conversion for the newer Volvo Fh “13″. Here in Norway the markert is better for Volvo parts than in other countries, and especially tax axles, since this is more commen here. And also the Globetrotter roof I miss. The one that M&G has, does not have the right shape.
We are around 15 active truckmodel-builders in Norway, so hopefully you will get more orders from here. Keep up the good work! I will most deffent order more of your parts!
Regards from Knut S.
Many thanks for your reply!
Wrote it down.
Best regards,
Andrey.
Hello!
I would like that you have rear wings for Volvo FH
and conversionskit to Volvo NH
Best regards
Kenneth Andersson
Hello Kenneth,
Many thanks for your comment.
Rear wings… hmm not complicated kit
Best regards,
Andrey.
driver and passenger figures would be good
Ouch.
I’m not a sculptor…
This is a problem
Hello Andrey!
Some suggestions!
Volvo FH13 theme is still poor, new chassis for Volvo, NH series conversation, FM series cab ,FL series cab!
MB Actros with L cab, MB Axor cab, MB Atego cab!
Distribution vehicles: MB Atego,Volvo FE, IVECO Eurocargo!
Hope that give some ideas!
Robert
Many thanks Robert!
Robert, what did you mean “new chassis for Volvo”? Only frame (photo-etched frame), or complete chassis with suspension, running gears and frame?
Currently I have started my another big project, conversion kit, so I’m not able to make another big kit, but I wrote down your suggestions for future
Currently my list is following:
- current project (information will be later);
- ZiL, 6×6 or 2×4 currently have no decision (full kit);
- Ural 6×6 (full kit);
And small kits like tires, spotlights, engines, interiors, etc.
Hello Andrey,
MB Axor, Actros L cab, and MB Actros exhaust assembly for MP2/3, also MB 6 cylinder engine,
Looking forward to the Kamaz
Ron
Hello Ron,
Kamaz is already in Czech, waiting for calculation from casters.
Many thanks for your ideas; starting collecting information about exhaust (I will do it at least!), and OM471.
Best regards,
Andrey.
And one more question for all.
What do you think about MAN engines?
Andrey.
Hi Andrey
Scania DS11 engine with the two rocker covers,fitted to 0,1,2 and 3 Series Scania’s.
Volvo F12 V3 raised roof section and updated lower grill for Italeri F12.
Double drive set up with spring suspension for Scania
Conversion front panel to convert Italeri Fiat Cowboy and Turbo Star into older Fiat 697.
Single drive axle and spring suspension for Italeri Formel 6 MAN
Single drive and spring suspension for Italeri Mercedes ‘Desert Train’
80′s style ‘Hatcher’ clear sunvisor. As seen in this photo.
http://www.flickr.com/photos/57633672@N07/7506794152/in/photostream
Thanks Jamie
Hi Jamie,
Wow! Big list!..
Many thanks,
Andrey.
Thanks Andrey,
Yes a bit of a wish list really.
I meant to say Volvo F12 V2 not 3 roof section and lower grill
invece per il kit per iveco eurostar ci sono progetti ciao grazie
Hello Gian Luca,
Thanks for your comment, but I’m not sure about Iveco, sorry….
Hello Andrey
Volvo N-series (N7,N10,N12) cab and hood (european setup)
Volvo N88 (cab and hood)
Volvo lift bogie with leaf springs
Scania T140, 141 cab and hood (In my opinion, JCL version of this is unsuccesfull)
Best Regards
Kimmo
Hello Kimmo,
Thanks for your comment. Kits added to my list.
Hello Andrey!
Yes I mean complete chassis for Volvo F13, with new tipe of rear air suspension, optional front axle with air suspension !?
Some new suggestions: -bumper for Volvo FMX
-Volvo D13 complete motor
-Volvo front and rear axles with disc brakes, optional for MEGA tipe
-MAN XL cab sonversation
– YES FOR MAN ENGINES!!!
-bumper and mirrors for Renault Premium older series
-day cab from Renault Kerax,Midlum
-day cab for Volvo FE,FL ( Premium cabs)
-DAF XF (95 and 105) rear wings new tipe
-new tipe Kamaz cab
Hope that give some more ideas!
Robert
Hello Robert,
Real big list! Will think about it
Best regards,
Andrey.
Hello Andrey,
how about an standart liftaxle kit to convert a 4×2 chassis to a 6×2 chassis.
A standart kit that can be used for many Euro-trucks (MAN, Mercedes, DAF, Volvo…)
For example:
http://u.jimdo.com/www25/o/sdd69e88fb59c561a/img/i276a4c53042800b7/1298850613/std/image.jpg
http://u.jimdo.com/www25/o/sdd69e88fb59c561a/img/i775ef7402e4d6e7e/1298850613/std/image.jpg
http://u.jimdo.com/www25/o/sdd69e88fb59c561a/img/id15af2ebb53dfc92/1298849954/std/image.jpg
Or something like this body:
http://u.jimdo.com/www25/o/sdd69e88fb59c561a/img/i2ef0510f4bce83b4/1298851236/std/image.jpg
Regards
Oliver
Hello Oliver,
Thanks for your comment!
Well, these lift axles are real headache. In my opinion there is no standard axle. For example DAF and MAN has different lifting axles. And I have information that at least Volvo do not producing their own lifting axle; they order axles at different company. But I can’t find what exactly axles they use.
So real headache…
Body… That’s an interesting idea! Thank you
Hello Andrey!
Now we have new Italeri MAN-truck, but we have too many details from older one. It would be great if You can make new rear wings, and rear lights for MAN, and I dream about MAN-engine! It is frustrating to see those all frameparts are one big “spider”. For us who want to make other axle-conversion, it is big work to cut everything into pieces… and that thing (engine… : ( )
-Pasi-
Hello Pasi,
Many thanks for your comment.
First of all – Italeri new MAN is on the way to me, big thanks to Heinz from Model Maker Shop!
As soon as kit will arrive to me, I will start scratching all new facelifting kit. So in end of September or in October this kit will be in stock.
Rear wings – yes, no doubts; rear lights… don’t sure about it. There are some real problems with lights, so I must to think first. Engines. I think I shall make V-8 and 6-in row engines
Hmm… Where I can find additional hours in a day?..
Andrey.
Andrey, You make our dreams come true = resin… I wanna give you strenght by thougts! Giving
Time is little bit difficult….
-Pasi-
Hi Andrey: I would like to see a condo roof for the Italeri Freightliner FLD 120 and A Volvo d16 engine kit also for Italeri volvo vn780 and hood hinges for the volvo ( complete engine bay kit).
Thanks Doug Spencer
Thank you, Doug for ideas!
I wrote down them, but right now I’m working hard to finish Modern Conventional truck…
As soon as we can get CNC router we can make our kits faster, but now it is loong story. Everything except few parts are handmade…
Best regards,
Andrey.